sbr and powerdi are registered trademarks of diodes incorporated. SBRT20U60SP5 document number: ds36825 rev. 3 - 2 1 of 4 www.diodes.com march 2014 ? diodes incorporated SBRT20U60SP5 new product advanced information 20a trenchsbr trench super barrier rectifier powerdi ? 5 product summary v rrm (v) i o (a) v f(max) (v) @+25c i r(max) (ma) @+25c 60 20 0.53 0.4 description and applications packaged in the compact thermally efficient powerdi5 package, the trenchsbr SBRT20U60SP5 provides ultra-low forward voltage drop (v f ) and provides excellent low reverse leakage stability at high temperatures. it is ideal for use as a rectification, freewheeling or polarity protection diode in applications such as: ? >10w ac/dc adaptors/chargers ? dc/dc converters features and benefits ? ultra low forward voltage drop (v f ) helps ? minimizes power losses ? excellent reverse leakage (i r ) stability at higher temperatures ? thermally efficient package for cooler running applications ? less than 1.1mm package profile ideal for thin applications ? lead-free finish; rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) mechanical data ? case: powerdi5 ? case material: molded plasti c, ?green? molding compound. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminal connections: see diagram below ? weight: 0.093 grams (approximate) ordering information (note 4) part number case packaging SBRT20U60SP5-13 powerdi5 5000/tape & reel SBRT20U60SP5-13d (note 5) powerdi5 5000/tape & reel SBRT20U60SP5-7 powerdi5 1500/tape & reel SBRT20U60SP5-7d (note 5) powerdi5 1500/tape & reel notes: 1. eu directive 2002/95/ec (rohs) & 2011/65/eu (roh s 2) compliant. all applicable rohs exemptions applied. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- a nd antimony-free, "green" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4. for packaging details, go to our website at http://www.diodes.com/p roducts/packages.html. 5. powerdi5 available in 5k quantity on 13inch reel &12mm tape, part number suffix ?13d?; 1.5k quantity on 7inch reel also, par t number suffix ?7?. diodes also provides 12mm tape with 7inch reel, part number suffix ?7d? marking information yywwk t15u50s t20u60s left pin right pin note: pins left & ri g ht must be electrically connected at the printed circuit board. bottomside heat sink bottom view top view powerdi5 ? green t20u60s = product type marking code yyww = date code marking yy = last two digits of year (ex: 14 = 2014) k = factory designator
sbr and powerdi are registered trademarks of diodes incorporated. SBRT20U60SP5 document number: ds36825 rev. 3 - 2 2 of 4 www.diodes.com march 2014 ? diodes incorporated SBRT20U60SP5 new product advanced information maximum ratings (@t a = +25c, unless otherwise specified.) characteristic symbol value unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm 60 v average rectified output current io 20 a non-repetitive peak forward surge current 8.3ms i fsm 320 a thermal characteristics characteristic symbol value unit typical thermal resistance junction to ambient (note 6) r ja 11 c/w typical thermal resistance junction to lead (note 6) r jl 2 c/w operating and storage temperature range t j, t stg -55 to +150 c electrical characteristics (@t a = +25c, unless otherwise specified.) notes: 6. device mounted on 2 o z. pcb with heatsink 50mm*50mm*23mm. 7. short duration pulse test used to minimize self-heating effect. i average rectified output current (a) figure 1 forward power dissipation f(av) p , p o we r dissi p a t i o n (w) d 0 2 4 6 8 10 12 0 5 10 15 20 25 t = 150 j v , instantaneous forward voltage (mv) f figure 2 typical forward characteristics i, i n s t a n t a n e o u s f o r wa r d c u r r e n t (a) f 0.0001 0.001 0.01 0.1 1 10 100 0 100 200 300 400 500 600 t = 25c a t = 85c a t = 125c a t = 150c a t = -55c a characteristic symbol min typ max unit test condition forward voltage drop v f ? ? ? 0.40 0.48 0.34 ? 0.53 0.39 v i f = 10a, t a = +25c i f = 20a, t a = +25c i f = 10a, t a = +125c leakage current (note 7) i r ? ? 0.1 ? 0.4 80 ma v r = 60v , t a = +25c v r = 60v , t a = +125c
sbr and powerdi are registered trademarks of diodes incorporated. SBRT20U60SP5 document number: ds36825 rev. 3 - 2 3 of 4 www.diodes.com march 2014 ? diodes incorporated SBRT20U60SP5 new product advanced information package outline dimensions please see ap02002 at http://www.diodes.com /datasheets/ap02002.pdf for latest version. i , ins t an t ane o u s r eve r se c u r r en t (a) r v , instantaneous reverse voltage (v) r figure 3 typical reverse characteristics 10 100 1000 10000 100000 0 102030405060 t = 25c a t = 85c a t = 125c a t = 150c a v , dc reverse voltage (v) r figure 4 total capacitance vs. reverse voltage c , t o t al c a p a c i t an c e (pf) t 100 1000 10000 100000 0 5 10 15 20 25 30 35 40 f = 1mhz 0.00 5.00 10.00 15.00 20.00 25.00 25 50 75 100 125 150 figure 5 forward current derating curve t , ambient temperature (c) l i , average rectified output current (a) o with heatsink (note 6) without heatsink powerdi ? 5 dim min max a 1.05 1.15 a2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 d 3.90 4.05 d2 3.054 typ e 6.40 6.60 e 1.84 typ e1 5.30 5.45 e2 3.549 typ l 0.75 0.95 l1 0.50 0.65 w 1.10 1.41 all dimensions in mm e e1 b1 a a2 a2 d b2 b1 e d2 l e2 l1 w
sbr and powerdi are registered trademarks of diodes incorporated. SBRT20U60SP5 document number: ds36825 rev. 3 - 2 4 of 4 www.diodes.com march 2014 ? diodes incorporated SBRT20U60SP5 new product advanced information suggested pad layout please see ap02001 at http://www.diodes.com/dat asheets/ap02001.pdf for the latest version. important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2014, diodes incorporated www.diodes.com dimensions value (in mm) c 1.840 g 0.852 x 3.360 x1 1.390 y 4.860 y1 1.400 g x c y1 (2x) y x1 (2x)
|
